Filter
Top Products
Reference
43
Check the box for the MapSource data that you want
displayed on the map.
The System Information page
Map Info Page
The Map Info page displays version and map name(s) for any MapSource CD-ROM data stored on an
installed CF data card. A box appears to the immediate left of each map name (directly under ‘Enabled’).
When the box is checked, the designated map data appears on the map — at the appropriate map scales
and when within the boundaries of that map area.
To turn individual MapSource maps on or off:
1. MapSource data must fi rst be uploaded to a CF data card and installed in your StreetPilot 2610/2650.
2. Select the ‘MapSource Info’ option from the Info menu, then scroll through the list of available maps.
3. If a check mark appears in the box to the left of a map name, that map is turned on and appears on the
map display (maps that are disabled cannot be used for routing). If necessary, select the name of any
listed map to add or remove the check mark.
4. You may also press the unit or remote MENU key and select options to ‘Enable All Maps’ or ‘Disable All
Maps’.
For more information on MapSource and CF data cards, see page 53.
System InfoPage
The System Info window shows the unit software version and unit ID number.
Map Info Page
2610_2650 OM.indd 43 8/1/2003, 4:16:07 PM