Garmin 100027303 GPS Receiver User Manual


 
Reference
18
Trip Information Page
The third main page is the Trip Information page. If you are making a long trip, you may fi nd the Trip
Information page very useful. It indicates your current speed and many helpful statistics about your trip.
The following are useful suggestions to aid in maximizing the use of the Trip Information page:
Be certain to reset the Trip Computer before beginning a trip (see next page). If you make frequent
stops, leave the StreetPilot 2610/2650 powered on and receiving satellites. This allows the unit to accu-
rately measure elapsed time during the trip. However, some vehicles disconnect power to the cigarette
lighter when the ignition is turned off.
The following trip information is displayed on the Trip Information page:
Time of Day
Current time.
Compass Ribbon
Shows your current compass heading while moving with a red indicator arrow.
Speed This is the current vehicle speed, displayed in miles or kilometers an hour.
Odometer
A running total of distance traveled, based upon the distance between second-by-second loca-
tion readings, since the Trip Computer was last reset.
Mileage Log Allows you to use up to four different mileage odometers for recording trip distances. You
may also rename each mileage log (see next page).
Driving Avg Your average speed of travel during the time the vehicle has been in motion, since the Trip
Computer was last reset.
Overall Avg
Your average speed of travel (including time stopped) during the time the StreetPilot 2610/
2650 has been tracking your location since the Trip Computer was last reset.
Max Speed
The maximum speed recorded since the Trip Computer was last reset. Max Speed may also
be reset individually without resetting other Trip Computer information.
Driving Time
The length of time that the vehicle has been in motion since the Trip Computer was last
reset.
The Trip Information page
Trip Information Page
Select from different Mileage Logs.
2610_2650 OM.indd 18 8/1/2003, 4:15:51 PM