Filter
Top Products
1-28
1.27 Anchor Watch
The anchor watch feature helps you moni-
tor whether own ship is dragged by wind
and/or tide while at anchor. This feature
requires ship position data from a suitable
radio navigational aid. Provided that own
ship's physical data has been entered, an
own ship mark can be displayed when the
anchor watch feature is activated. The
message "ANCHOR WATCH ERR" ap-
pears in red when position data is not in-
putted.
Notes:
1) The own ship mark is available on the
R-type radar only; unavailable on the
IMO type.
2) The own ship mark is created with data
on ship's length, width, radar antenna
location, etc. To display an own ship
mark, ask your nearest FURUNO rep-
resentative or dealer.
Anchor watch in standby or
transmit status
IMO-type
On the IMO type the anchor watch fea-
ture is available only in STANDBY status.
R-type
On the R-type the anchor watch feature
is available in either STANDBY or
TRANSMIT status.
Activating anchor watch
To set up the anchor watch feature:
1. On the ANCHOR WATCH menu, press
the [2] key to select menu item 2 AN-
CHOR WATCH OFF/ON.
2. Further press the [2] key to select (or
highlight) ON, followed by the ENTER
key to conclude your selection. The
label WATCH appears at the lower-left
corner of the screen.
3. Press the [3] key to select menu item 3
ALARM OFF/ON. Further press the [3]
key to select (or highlight) ON or OFF,
followed by the ENTER key to conclude
your selection. (This operation deter-
mines whether to activate the anchor
watch audible alarm.)
Alarm range setting
Press the [4] key to select menu item 4
ALARM RANGE on the ANCHOR
WATCH menu. Enter a desired alarm
range between 0.1 and 9.999 nm with
numeric keys and press the ENTER key
to conclude your key input.
An anchor watch alarm circle thus estab-
lished shows up as a red circle on the
screen. When own ship is dragged out of
this alarm circle, an audible alarm is gen-
erated and the on-screen label ANCHOR
WATCH turns red.
To silence the audible alarm, press the
AUDIO OFF key on the control panel.
1 [FUNCTIONS]
2 RADAR 1
3 FUNCTION KEY 1
4 FUNCTION KEY 2
5 FUNCTION KEY 3
6 FUNCTION KEY 4
7 RADAR 1/2
8 ANCHOR WATCH
9
0 [SYSTEM SETTING 2]
[SYSTEM SETTING 1]
Hit [0].
1 [SYSTEM SETTING 1]
2 ANCHOR WATCH
3 ALARM
4 ALARM RANGE
5 HISTORY
[ANCHOR WATCH]
Hit [9].
OFF/ON
OFF/ON
0.000 NM
OFF/ON
Hit [RADAR MENU].
* R-type only
1 PULSE WIDTH
2 ECHO STRETCH
3 ECHO AVERAGE
4 PANEL DIMMER
5 ECHO COLOR
6 SHIP'S SPEED
7 INDEX LINES
8 SET/DRIFT
9 BRILLIANCE
0 [SYSTEM SETTING 1]
1/2
OFF/1/2
OFF/1/2/3
OFF/DIM/M/BRT
YEL/GRN/COLOR*
LOG/NAV*/MAN
NO.2 VRM/MAN
OFF/MAN
SET 000.0
DRIFT 00.0 KT
[FUNCTIONS 1]