Filter
Top Products
iii
Reference Manual
00809-1600-4530, Rev AA
Commissioning and Validation Procedure for Rosemount Radar
March 2015
Commissioning and Validation Procedure for Rosemount Radar
Rosemount 5300 Series
Failure to follow safe installation guidelines could result in death or serious injury.
Only qualified personnel should install the equipment.
Use the equipment only as specified in this guide and the Reference Manual. Refer to
the Rosemount 5300 Series Reference Manual (document number 00809-0100-4530)
for more instruction.
Explosions could result in death or serious injury.
Installation of device in an explosive environment must be in accordance with
appropriate local, national and international standards, codes, and practices.
Ensure device is installed in accordance with intrinsically safe or non-incendive field
practices.
Electrical shock could result in death or serious injury.
Avoid contact with the leads and terminals. High voltage that may be present on leads
can cause electrical shock.
Make sure the main power to the Rosemount 5300 Series Transmitter is off and the
lines to any other external power source are disconnected or not powered while wiring
the transmitter.
Process leaks could result in death or serious injury.
Handle the transmitter carefully.
If the process seal is damaged, gas could escape from the tank when removing the
transmitter head from the probe.
Any substitution of non-authorized parts or repair, other than exchanging the complete
transmitter head or probe assembly, may jeopardize safety and is prohibited.
Unauthorized changes to the product are strictly prohibited as they may unintentionally
and unpredictably alter performance and jeopardize safety. Unauthorized changes that
interfere with the integrity of the welds or flanges, such as making additional perforations,
compromise product integrity and safety. Equipment ratings and certifications are no
longer valid on any products that have been damaged or modified without the prior written
permission of Emerson Process Management. Any continued use of product that has been
damaged or modified without prior written authorization is at the customer's sole risk and
expense.