Filter
Top Products
4
Reference Manual
00809-1600-4530, Rev AA
Section 2: Installation & configuration
March 2015
Installation and Configuration
Probe type
Hold Off/Upper Null Zone. This parameter should only be changed if there are
disturbing objects close to the probe, e.g. nozzle disturbances. No valid measurements
are possible above the Hold Off Distance.
Measurement mode
Rapid level changes
Dielectric constant
Volume configuration. For volume calculations, you can select one of the standard tank
shapes or the strapping option. Select None if volume calculation is not used.
Analog output (HART)
Figure 2-2. Illustration of Analog Output (HART) Parameters
For more information, see Section 5: Configuration in the Rosemount 5300 Series Reference
Manual (document number 00809-0100-4530).
A
B
C
D
F
E
G
H
I
A. 20mA
B. Range 0 -100%
C. 4mA
D. Lower Reference Point
E. Upper Reference Point
F. Upper Blind Zone
G. Reduced accuracy
H. Reduced accuracy
I. Lower Blind Zone