Filter
Top Products
2. Press any button on the appropriate keyless access
transmitter to identify yourself as Driver 1 or Driver 2.
The numbers on the back of the keyless access
transmitters correspond to the driver number.
3. Press the CONFIG hard key.
4. Touch the Vehicle screen button.
5. Press the Memory screen button.
6. Select either Recall Driver Settings or Store Driver
Settings. See “RECALL Driver Settings” and
“STORE Driver Settings” next for more information.
7. The appropriate driver information should be
highlighted. If you wish to change driver numbers,
touch the appropriate screen button, either
DRIVER 1 or DRIVER 2.
Driver Select: Change which driver is active by
selecting either the Driver 1 or Driver 2 screen buttons.
The numbers on the back of the keyless access
transmitters correspond to the driver number.
RECALL Driver Settings
To recall driver settings that have been stored, do the
following:
RECALL DRIVER Settings: Touch this screen button
to have your previously stored seat, steering column,
outside mirror, climate control, and radio positions
recalled.
If the vehicle is in PARK (P), a beep will sound and your
previously saved driving position will then be recalled.
If the vehicle is not in PARK (P), three beeps will sound
and your previously saved driving position will not be
recalled.
A memory recall can be stopped by pressing any memory
seat or mirror position button. If you would like the stored
driving positions to be recalled when unlocking your
vehicle with the keyless access transmitter or when
starting your vehicle, see “Occupant Position” earlier
in this section.
RECALL EXIT Settings: This screen button allows you
to recall the seat and steering column to the appropriate
exit positions.
If the vehicle is in PARK (P), a beep will sound and your
previously saved exit position will then be recalled. If the
vehicle is not in PARK (P), three beeps will sound and
your previously saved exit position will not be recalled.
A memory recall can be stopped by pressing any memory
seat or mirror position button. If you would like the stored
exit positions to be recalled when your vehicle is in
PARK (P), the vehicle is off, and the driver’s door is
opened, see “Occupant Position” earlier in this section.
5-17