Filter
Top Products
To enter the personal settings mode, use one of the
following procedures:
1. Be sure the ignition is either on, in accessory
mode, or in RAP (Retained Accessory Power).
The transmission must be in either PARK (P),
or the vehicle must be stopped.
2. Press any button on the appropriate keyless access
transmitter to identify yourself as Driver 1 or Driver 2.
The driver number is shown on the back of the
keyless access transmitter.
3. Press the CONFIG hard key.
4. Touch the Vehicle screen button.
5. Access the Personal Menu Setting by pressing the
Personal Settings screen button.
6. The appropriate driver information should be
highlighted. If you wish to change driver numbers,
touch the appropriate keyless access transmitter to
identify yourself as Driver 1 or Driver 2. The system
will show the start up screen when the driver is
changed.
7. The Personal Settings button must be highlighted to
continue programming. If it is not highlighted, touch
it. If it is highlighted, touch any of the buttons on
the right of the screen to begin programming.
Some features have submenus that show additional
features that can be turned on or off. After entering a
submenu, select a feature and scroll through the menu
and make the necessary change.
5-5