Filter
Top Products
Navigation delete all waypoints and destination,
navigation cancel all waypoints and destination:
These commands instruct the system to cancel
the current destination and all waypoints. The system
will request that you confirm. After the prompt,
state “Yes” to confirm or “No” to cancel.
Navigation voice guidance off, navigation voice
guidance: These commands instruct the system to
turn route voice guidance off and on.
Navigation detour [entire route]: This command
instructs the system to add a detour to your route.
The system will request that you confirm. After
the prompt, state “Yes” to confirm or “No” to cancel.
Radio Commands
The commands are only available when you are in one of
the following audio modes, AM, FM, XM™ (if equipped),
or WX (if equipped).
Radio: These commands instruct the system to turn
the audio system on.
Radio turn off: These commands instruct the system
to turn the audio system off.
Radio [set] balance center: These commands instruct
the system to set the fade or balance to the center and
middle.
Radio scan up, radio scan down: These commands
instruct the system to scan up or down through radio
stations.
Radio [band] [select] AM, radio [band] [select] FM,
radio [band] [select] XM, radio [band] [select]
satellite, radio [band] [select] WX, radio [band]
[select] weather band: These commands instruct the
system to go to either the AM, FM, XM (if
equipped), or WX (if equipped) radio bands.
Radio [select] (frequency) AM, radio [select]
(frequency) FM, radio [select] (channel) weather
band: These commands instruct the system to go to a
specific frequency on either the AM, FM, or weather
bands — examples; Radio select ninety seven point one
FM, Radio select one weather band, Radio select ten
forty AM.
Radio [select] (channel) XM, radio [select] (channel)
satellite: These commands instruct the system
to go to a specific channel on the XM™ band
(if equipped) — example; Radio select one fifty one XM.
Radio [show] [next] presets: This command instructs
the system to change to the next presets on the
active band.
Radio help: This command instructs the system to
assist with radio commands. The radio commands will
display on the screen.
The word “middle” can be substituted in place of the
word “center”.
The word “fade” can be substituted in place of the word
“balance”.
4-11