Filter
Top Products
The word “fade” can be substituted in place of the word
“balance”.
The word “chapter” can be substituted in place of the
word “track”.
Climate Control Commands
Heater [set] fan high: This command will increase the
fan speed by one speed. Repeat the command until the
desired fan speed is achieved.
Heater [set] fan low: This command will decrease the
fan speed by one speed. Repeat the command until the
desired fan speed is achieved.
Heater defrost: This command instructs the system to
turn both the front and rear defrost on.
Heater front defrost: This command instructs the
system to turn the front defrost on.
Heater rear defrost: This command instructs the
system to turn the rear defrost on.
Heater help: This command instructs the system to
assist with climate control commands. Help commands
will display on the map screen when the vehicle is
stopped.
The words “heat”, “A/C”, and “air conditioning” can be
substituted in place of the word “heater”.
The word “defog” can be substituted in place of the
word “defrost”.
Personalization Commands
These functions are available to help with setting,
storing, and recalling driver settings.
Set driver one, set driver two: These commands
instruct the system to change the driver setting between
driver 1 and driver 2. See Personalization on page 5-2
for more information.
Select driver one: This command selects the memory
settings for driver 1. The seat, steering wheel, and
navigation system settings will change to those stored
by driver 1.
Select driver two: This command selects the memory
settings for driver 2. The seat, steering wheel, and
navigation system settings will change to those stored
by driver 2.
Driver help: This command instructs the system to
assist with driver commands. Help commands will
display on the map screen when the vehicle is stopped.
4-13