Filter
Top Products
56 Matrix Modules Command Reference Chapter 4
DISPlay:MONitor[:STATe]
DISPlay:MONitor[:STATe] <mode> turns the monitor mode ON or OFF.
Parameters
Comments Monitoring Switchbox Channels: DISPlay:MONitor:STATe ON or
DISPlay:MONitor:STATe 1 turns the monitor mode ON to show the
channel state of the selected module. DISPlay:MONitor:STATe OFF or
DISPlay:MONitor:STATe 0 turns the channel monitor OFF.
Selecting the Module to be Monitored: Use DISPlay:MONitor:CARD
<number> AUTO to select the module.
Monitor Mode with a Matrix Module: When monitoring mode is turned ON, a
hexadecimal number representing the channels closed will be displayed at
the bottom of the display terminal. For example, for an E1466A with row 0,
columns 0-3 closed, will look like the following:
R0: 0000 0000 0000 000F R1: 0000 0000 0000 0000 R2: 0000 0000 ... etc.
*RST Condition: DISPlay:MONitor[:STATe]OFF | 0
Example Enabling Monitor Mode
DISP:MON:CARD 2
! Select module #2 in a switchbox
DISP:MON 1
! Turn monitor mode ON
Name Type Range of Values Default Value
<mode>boolean
ON | OFF | 1 | 0 OFF | 0