Filter
Top Products
Configuring the Matrix Modules 29Chapter 2
Attaching the
Terminal Modules
to the Switch
Module
Figure 2-10 shows how to attach the E1465A, E1466A, or E1467A terminal
modules to the switch module.
Figure 2-10. Attaching the Terminal Modules to the Switch Module
Extraction
Levers
Extend the extraction levers on the terminal13
E1466A
Module
module.
Use small screwdriver
to release the two
extraction levers
Relay Marix Switch Module.
Align the terminal module connectors to the
2
Extraction Lever
module to the Relay Matrix Switch Module.
Apply gentle pressure to attach the terminal
terminal module onto the Relay Matrix Switch
Push in the extraction levers to lock the
4
Module.
To remove the terminal
module from the Relay Matrix
Switch Module, use a small screw-
driver to release the two extraction
levers and push both levers out simultaneously
to free it from the Relay Matrix Switch Module.
Extraction Lever