Filter
Top Products
Configuring the Matrix Modules 23Chapter 2
Installing the
Switch Module in a
Mainframe
E1465/66/67A Relay Matrix Switch modules may be installed in any slot
(except slot 0) in a C-size VXIbus mainframe. See Figure 2-4 to install the
module in a mainframe.
Figure 2-4. Installing the Switch Module in a VXIbus Mainframe
To remove the module from the mainframe,
Tighten the top and bottom screws
until the backplane connectors touch.
Slide the module into any slot (except slot 0)
reverse the procedure.
mainframe.
to secure the module to the
Levers
Extraction
Set the extraction levers out.
4
1
2
the extraction levers.
mainframe by pushing in
Seat the module into the
3
NOTE: The extraction levers will not
seat the backplane connectors on older
VXIbus mainframes. You must manually
seat the connectors by pushing in the
module until the module's front panel is
flush with the front of the mainframe. The
extraction levers may be used to guide or
remove the switch module.