Filter
Top Products
5-2
RayChart 420/420D Chartplotter
• If a suppression ferrite is attached to a cable, this ferrite should not be
removed. If the ferrite needs to be removed during installation it must be
reassembled in the same position.
Suppression ferrites
The following illustration shows typical cable suppression ferrites fitted to
Raytheon equipment. Always use the ferrites supplied by Raytheon.
Connections to other equipment
If your Raytheon equipment is to be connected to other equipment using a cable
not supplied by Raytheon, a suppression ferrite MUST always be fitted to the
cable close to the Raytheon unit.
5.2 Unpacking and inspecting the components
Unpack your RayChart 420 Chartplotter carefully. Retain the carton and
packing materials in the event that you need to return the unit for service.
Check that you have all the correct system components. These depend on your
system package:
ItemItem
ItemItem
Item
Part No.Part No.
Part No.Part No.
Part No.
Supplied withSupplied with
Supplied withSupplied with
Supplied with
RC420 SystemRC420 System
RC420 SystemRC420 System
RC420 System E32012
comprising:
RC420 Chartplotter E32014 RC420
RS112LP E32002 RC420
RC420D SystemRC420D System
RC420D SystemRC420D System
RC420D System E32013
comprising:
RC420 Chartplotter E32014 RC420D
RS114 E32003 RC420D
RC420 Accessories:RC420 Accessories:
RC420 Accessories:RC420 Accessories:
RC420 Accessories:
Sun cover E35004 All
Panel mounting kit E35006 Optional
Trunnion mount kit E35005 All
Power cable R38024 All
GPS extension cable E35003 Optional
Handbook 81162 All
Quick Reference Card 86051 All