Filter
Top Products
Lighting
84
X
Turn the exterior lamp switch to position
C or B (Y page 81).
X
Switching on front fog lamps: Pull out the
exterior lamp switch to first stop.
The green indicator lamp ¥ in the exte-
rior lamp switch comes on.
X
Switching on rear fog lamp: Pull out the
exterior lamp switch to second stop.
The rear fog lamp, the front fog lamps and
the yellow indicator lamp † in the exte-
rior lamp switch come on.
X
Switching off front fog lamps/rear fog
lamp: Push in the exterior lamp switch to
its stop.
Locator lighting and night security illu-
mination
Locator lighting and night security illumina-
tion are described in the “Control system”
section, see “Setting locator light-
ing” (Y page 122) and “Setting night security
illumination (Headlamps delayed shut-off fea-
ture)” (Y page 123).
Combination switch
1
High beam
2
High-beam flasher
High beam
X
Turn the exterior lamp switch to position
B (Y page 81).
X
Switching on: Push the combination
switch in direction of arrow 1.
The high-beam headlamp indicator lamp
A in the instrument cluster comes on.
X
Switching off: Pull the combination switch
in direction of arrow 2 to its original posi-
tion.
High-beam flasher
X
Switching on: Pull the combination switch
briefly in direction of arrow 2.
Turn signals
1
Turn signals, right
2
Turn signals, left
X
Press the combination switch in direction
of arrow 1 or 2.
The corresponding turn signal indicator
lamp L or K in the instrument clus-
ter flashes.
The combination switch resets automatically
after major steering wheel movements.
Controls in detail