Filter
Top Products
Retractable hardtop
202
1
Wind screen
2
Snap fastener (with handle cap)
3
Supporting strap
4
Fastening pin
5
Gap
6
Handle cap
Installing
X
Remove wind screen 1 from its storage
bag and unfold.
X
Attach supporting straps 3 to fastening
pins 4.
X
Make sure the lower wind screen edging is
inserted through gap 5 between the stor-
age compartment and the rear panel.
X
Close snap fasteners 2 by pushing in han-
dle cap 6.
X
Pull wind screen 1 on molding over roll
bars. Pull the wind screen edging, not on
the netting itself.
Removing
X
Pull wind screen 1 from roll bars.
X
Open snap fasteners 2 by pulling out han-
dle cap 6.
X
Loosen supporting straps 3 from fasten-
ing pins 4.
X
Fold the wind screen and put it back into
storage bag.
Luggage cover
The luggage cover covers luggage/cargo in
the trunk.
!
To prevent damage to the retractable
hardtop or luggage/cargo when lowering
the retractable hardtop:
R
Load trunk only to the height of the lug-
gage cover.
R
Do not permit luggage/cargo to push up
the closed luggage cover.
R
Do not place anything on top of or in front
of the luggage cover.
R
Do not place anything on the shelf behind
the roll bar.
Controls in detail