Filter
Top Products
Driving systems
184
Driving systems
Introduction
The cruise control driving system is described
on the following pages.
The ABS, BAS and ESP
®
driving safety sys-
tems are described in the “Safety and secur-
ity” section (Y page 58)
Cruise control
The cruise control automatically maintains
the speed you set for your vehicle.
The use of the cruise control is recommended
for driving at a constant speed for extended
periods of time.
The currently set speed or last set speed
(“Resume” function) appears in the status
indicator of the multifunction display:
R
USA only: e.g. CRUISE 55 Miles
R
Canada only: e.g. Ñ 90 Km/h
G
Warning!
The cruise control is a convenience system
designed to assist the driver during vehicle
operation. The driver is and must always
remain responsible for the vehicle’s speed
and for safe brake operation.
Only use the cruise control if the road, traf-
fic, and weather conditions make it advisa-
ble to travel at a constant speed.
R
The use of the cruise control can be dan-
gerous on winding roads or in heavy traf-
fic because conditions do not allow safe
driving at a constant speed.
R
The use of the cruise control can be dan-
gerous on slippery roads. Rapid changes
in tire traction can result in wheel spin
and loss of control.
R
Deactivate the cruise control when driv-
ing in fog.
The “Resume” function should only be
operated if the driver is fully aware of the
previously set speed and wishes to resume
this particular preset speed.
G
Warning!
The cruise control brakes automatically so
that the set speed is not exceeded. The
brake pedal depresses automatically when
the cruise control engages the brakes.
Keep the driver’s foot area clear at all times,
including the area under the brake pedal.
Objects stored in this area may impair
pedal movement which could interfere with
the braking ability of the cruise control sys-
tem.
Do not place your foot under the brake
pedal – your foot could become caught.
Keep in mind that the cruise control is a
convenience system designed to assist the
driver during vehicle operation. The driver
is and must always remain responsible for
the vehicle’s speed and for safe brake oper-
ation.
1
Setting current or higher speed
2
Setting current or lower speed
3
Canceling the cruise control
4
Resume to last set speed
Controls in detail