Filter
Top Products
Maintenance
258
Maintenance
Notes
The Maintenance System in your vehicle
tracks distance driven and the time elapsed
since the last maintenance service, calcu-
lates other maintenance service work
required, and calls for the next maintenance
service accordingly.
We strongly recommend that you have your
vehicle serviced at an authorized Mercedes-
Benz Center, in accordance with the Mainte-
nance Booklet at the times called for by the
maintenance service indicator.
i
Failure to have the vehicle maintained in
accordance with the Maintenance Booklet
and maintenance service indicator at the
designated times/mileage (kilometers) will
result in vehicle damage not covered by the
Mercedes-Benz Limited Warranty.
Maintenance service indicator mes-
sage
The maintenance service indicator message
will notify you when the next maintenance
service is due.
Starting approximately 1 month before the
next maintenance service is due, one of the
following messages will appear in the multi-
function display while you are driving or when
you switch on the ignition (example serv-
ice A):
Service A Due In XXXX Miles (Km)
Service A Due In XXX Days
Service A Due In X Day
Service A Due Now
The maintenance services will be indicated by
showing a service type A through type H in the
multifunction display. Types A through H are
classified based on estimated time needed to
perform the maintenance service, ranging:
from
Service A
(approximately 1 hour)
to
Service H
(approximately 8 hours)
Refer to Maintenance Booklet for a listing of
maintenance services and intervals they need
to be performed at.
Clearing the maintenance service indi-
cator message
The maintenance service indicator message
is automatically cleared
R
after approximately 10 seconds when you
switch on the ignition
R
after approximately 10 seconds when
reaching the service threshold while driving
R
after approximately 30 seconds, once the
suggested maintenance service term has
passed
X
To clear the maintenance service indi-
cator message: Press reset button J on
the instrument cluster.
The standard display appears in the multi-
function display.
Operation