Filter
Top Products
Seats
75
Lumbar support
You can adjust the contour of the seat’s lum-
bar support to help enhance support to your
spine.
1
Upper seat curvature
2
Lower seat curvature
X
Switch on the ignition.
X
Turn adjustment wheels 1 and 2 until
you have reached the desired seat curva-
ture.
Seat heating
1
Seat heating switch
The red indicator lamps in the switch come
on to show which heating level you have
selected.
The seat heating switches from level 3 (high)
to level 2 after approximately 5 minutes.
The seat heating switches from level 2 to level
1 (low) after approximately 10 minutes.
The seat heating automatically switches off
after approximately 20 minutes.
X
Switch on the ignition.
X
Switching on: Press switch 1.
Three red indicator lamps in the switch
come on.
X
Continue pressing switch 1 until desired
seat heating level is reached.
X
Switching off: Press switch 1 repeatedly
until all indicator lamps go out.
If one or more of the indicator lamps in the
seat heating switch 1 are flashing, there is
insufficient voltage available since too many
electrical consumers are turned on. The seat
heating switches off automatically.
The seat heating will switch back on again
automatically as soon as sufficient voltage is
available.
AIRSCARF neck-level heating
The AIRSCARF neck-level heating provides
the area surrounding the occupants’ necks
with a heated air stream flowing from open-
ings in the head restraints.
G
Warning!
When switching on the AIRSCARF neck-
level heating, the air streaming from the
openings may be very hot. When in close
proximity to the openings, you could be
seriously burned. To help avoid serious per-
sonal injuries, switch the AIRSCARF to a
lower heating level.
Controls in detail