Filter
Top Products
Replacing wiper blades
315
X
Press the new bulb gently into bulb socket
2 and turn clockwise until it engages.
X
Place bulb socket 2 back into the housing
and turn it clockwise until it engages.
Parking and standing lamp bulb
X
Turn bulb socket 4 with the bulb counter-
clockwise and remove it.
X
Pull the bulb out of bulb socket 4.
X
Press the new bulb gently into bulb socket
4.
X
Place bulb socket 4 back into the housing
and turn clockwise until it engages.
Replacing bulbs for rear lamps
Tail lamp unit
Since replacing bulbs in the tail lamp unit is a
technically highly demanding process, we
recommend to have them replaced at an
authorized Mercedes-Benz Center.
License plate lamps
1
Screws
2
Lamp cover
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
M.
X
Open the trunk.
X
Loosen both screws 1.
X
Remove lamp cover 2.
X
Replace the bulb.
X
Reinstall lamp cover 2.
X
Retighten screws 1.
Replacing wiper blades
Safety notes
G
Warning!
For safety reasons, switch off wipers and
remove SmartKey from starter switch
before replacing a wiper blade. Otherwise,
the wiper motor could suddenly turn on and
cause injury.
G
Warning!
Wiper blades are components that are sub-
ject to wear and tear. Replace the wiper
blades twice a year, preferably in the spring
and fall. Otherwise the windows will not be
properly wiped. As a result, you may not be
able to observe surrounding traffic condi-
tions and could cause an accident.
!
To avoid damage to the hood the wiper
arms should only be folded forward when
in the vertical position.
!
Never open the hood when a wiper arm is
folded forward.
Hold on to the wiper when folding a wiper
arm back. If released, the force of the
impact from the tensioning spring could
crack the windshield.
Practical hints
Z