Replacing bulbs
313
Front lamps
Lamp Type
1 Additional turn signal
lamp
LED
2 High-beam/high-beam
flasher lamp
H7 (55 W)
3 Turn signal lamp 3457 A
4 Halogen headlamp:
Low beam
H7 (55 W)
Bi-Xenon headlamp:
Low and high beam
20
D2S-35 W
5 Front fog lamp HB4 (51 W)
Corner-illuminating
front fog lamp
H7 (55 W)
6 Parking and standing
lamp
W 5 W
7 Side marker lamp W 5 W
Rear lamps
Lamp Type
8 High-mounted brake
lamp
LED
9 Side marker lamp LED
a Tail lamp, parking and
standing lamp, brake
lamp
LED
b License plate lamps C 5 W
c Backup lamp P 21 W
d Turn signal lamp PY 21 W
e Rear fog lamp (driver’s
side only)
P 21 W
Notes on bulb replacement
R
Only use 12 volt bulbs of the same type and
with the specified watt rating.
R
Switch the lights off before changing a bulb
to prevent short circuits.
R
Always use a clean lint-free cloth when han-
dling bulbs.
R
Your hands should be dry and free of oil and
grease.
R
If the newly installed bulb does not come
on, contact an authorized Mercedes-Benz
Center.
Have the LEDs and bulbs for the following
lamps replaced at an authorized Mercedes-
Benz Center:
R
Additional turn signal lamps in the exterior
rear view mirrors
R
High-mounted brake lamp
R
Bi-Xenon lamps
R
Front fog lamps
R
Side marker lamps
R
Rear lamps (except license plate lamps)
!
Do not replace the LEDs yourself. You
could otherwise damage the LEDs or parts
of the vehicle. Only have the LEDs replaced
at an authorized Mercedes-Benz Center.
20
Vehicles with Bi-Xenon headlamps: Low beam and high beam use the same D2S-35 W lamp. Do not replace the Bi-Xenon bulbs yourself. Contact an authorized
Mercedes-Benz Center.
Practical hints