Filter
Top Products
Control system
120
Lighting submenu
R
Setting daytime running lamp mode (USA
only) (Y page 122)
R
Setting locator lighting (Y page 122)
R
Setting night security illumination (Head-
lamps delayed shut-off feature)
(Y page 123)
R
Setting interior lighting delayed shut-off
(Y page 124)
Vehicle submenu
R
Setting automatic locking (Y page 124)
Convenience submenu
R
Activating easy-entry/exit feature
(Y page 124)
Instrument cluster submenu
Access the Instr. Cluster submenu via
the Settings menu. Use the Instr. Clus-
ter submenu to change the instrument clus-
ter display settings.
The following functions are available:
R
Selecting speedometer display mode
(Y page 120)
R
Selecting language (Y page 120)
R
Selecting display (digital speedometer or
outside temperature) for status indicator
(Y page 121)
Selecting speedometer display mode
X
Move the selection marker with button
æ or ç to the Instr. Cluster sub-
menu.
X
Press button j or k repeatedly until
the message Display Unit Speed-/
Odometer appears in the multifunction dis-
play.
The selection marker is on the current set-
ting.
X
Press button æ or ç to set speed-
ometer unit to Km or Miles.
Selecting language
X
Move the selection marker with button
æ or ç to the Instr. Cluster sub-
menu.
X
Press button j or k repeatedly until
the message Language appears in the mul-
tifunction display.
The selection marker is on the current set-
ting.
X
Press button æ or ç to select the
language to be used for the multifunction
display messages.
Controls in detail