Filter
Top Products
492
Controls in detail
Panorama roof with power tilt/sliding panel*
Synchronizing
The tilt/sliding panel and front roller sun-
blinds must be synchronized
ț after the tilt/sliding panel has been
closed manually (
୴ page 674)
ț after a malfunction
ț if the panorama roof with power
tilt/sliding panel can only be opened
with a jerking motion
Tilt/sliding panel and front roller
sunblind
̈ Switch on the ignition (୴ page 344).
̈ Move and hold the roof panel switch in
direction of arrow 2 until the front
roller sunblind is fully retracted.
̈ Keep holding the roof panel switch in
direction of arrow 2 for approximately
1 second.
̈ Move and hold the roof panel switch in
direction of arrow 1 until the front
roller sunblind is fully extended.
̈ Move and hold the roof panel switch in
direction of arrow 1 until the tilt/slid-
ing panel is slightly opened.
̈ Move and hold the roof panel switch in
direction of arrow 2 until the tilt/slid-
ing panel is fully closed.
̈ Keep holding the roof panel switch in
direction of arrow 2 for approximately
1 second.
̈ Check the Express-open feature of the
tilt/sliding panel (
୴ page 491).
If the tilt/sliding panel opens com-
pletely, the roof is synchronized. Other-
wise repeat the above steps.
Rear roller sunblind
̈ Switch on the ignition (୴ page 344).
̈ Press button 1 until the rear roller
sunblind is fully retracted.
̈ Keep holding button 1 for approxi-
mately 1 second.