Filter
Top Products
220
Control systems
COMAND navigation system (destination memory)
Example illustration: destination memory
list with input characters
1 Input characters
In the destination memory list with input
characters 1, the input characters are au-
tomatically activated.
̈ Destination memory list without in-
put characters: Press n immediately.
or
̈ Destination memory list with input
characters: Slide qm repeatedly until
the input characters disappear.
The list entry “My Address” is automat-
ically highlighted as long as you have
not entered any characters using the
input characters.
̈ If you have entered characters
from the list of input characters:
Rotate ymz or slide qm repeatedly
until the list entry “My Address” is
highlighted.
̈ Press n.
Further operation depends on whether you
want to enter the address manually or use
an address book entry as your own ad-
dress.
Entering an address manually
̈ If you want to assign your own ad-
dress for the first time: Select “Save
new entry”.
or
̈ If you want to change your own ad-
dress: Select “Change” Ǟ “Save new
entry”.
In both cases, the address input menu ap-
pears.
̈ Enter the address. Proceed as de-
scribed for destination entry in the “En-
tering a destination by address”
section (
୴ page 172).
̈ Select “Save” after entering the ad-
dress.
Your address is saved.
୴୴