Filter
Top Products
232
Control systems
COMAND address book
̈ Closing message: Select “OK”.
Depending on which data is missing or
cannot be found on the digital map, you
must now either:
ț select a state (province)
ț select a county
ț or enter a town/city
ț or enter a street
ț or enter a house number
̈ Selecting a state (province):
Select desired state (province) from
the list.
̈ Selecting a county: Select desired
county from the list.
̈ Entering a town: Proceed as de-
scribed for destination entry in the “En-
tering a town or city” section
(
୴ page 178).
̈ Entering a street: Proceed as de-
scribed for destination entry in the “En-
tering a street” section (
୴ page 180).
̈ Entering a house number: Proceed
as described for destination entry in
the “Entering a house number” section
(
୴ page 185).
If all data is available and matches the dig-
ital map data, the navigation system starts
the route calculation.
Voice entries
Adding or changing a voice entry
̈ Search for the address book entry with
or without a voice entry (
୴ page 226).
̈ Select “Options” Ǟ “Voice Name” Ǟ
“Add” or “Change”.
Subsequent operation is controlled by
voice. Voice Control* guides you
through the dialogs.
i
If you have added data, COMAND saves your
additions. This means that you do not need to
re-enter this additional data later on.
The COMAND memory saves the additional data
in a special field, which cannot be displayed. The
data, which you have entered in the address
book initially in the display, remains unchanged.
i
For voice entries, your vehicle must be
equipped with Voice Control*. You can not add
voice entries for address book entry that come
from the phone book in the mobile phone.
i
You can add one voice entry per address
book entry.