Filter
Top Products
102
Control systems
COMAND FM/AM radio
Selecting stations using the station list
̈ Select “Audio”Ǟ “Audio”Ǟ “FM/AM
Radio”Ǟ “FM”.
̈ Select “Radio”Ǟ “Station List”.
The station list appears. The dot R in
front of a list entry indicates the cur-
rently selected station. A number in
front of the list entry indicates the pre-
set position in the station preset mem-
ory.
̈ Select a station by rotating ymz or
sliding qmr and press n.
Selecting stations/channels using the
search function
̈ Slide omp or rotate ymz when the
main area is selected.
Depending on the direction in which
the controller is being slid or rotated,
the system searches upward or down-
ward and stops at the next receivable
station/channel.
Selecting stations using station
presets
̈ Select “Audio” Ǟ “Audio” Ǟ “FM/AM
Radio” Ǟ “FM” or “AM”.
̈ Select “Presets”.
or
̈ Press n when the main area is select-
ed.
The preset menu appears. The dot R
in front of a preset position indicates
that the currently selected station is
saved there.
̈ Select station preset by rotating ymz
or sliding qmr and press n.
Selecting stations by entering the fre-
quency manually
̈ Select “Audio”Ǟ“Audio”Ǟ“FM/AM
Radio”Ǟ“FM” or “AM”.
̈ Select “Radio”Ǟ“Frequency Entry”.
The menu for manual frequency entry
appears.
̈ Exiting menu without making an
entry: Press L back button in the
center console (
୴ page 86).
̈ Increasing or decreasing number:
Slide qmr or rotate ymz.
̈ Selecting the next number:
Slide mp.
̈ Confirming frequency entry:
Press n.
COMAND tunes in to the frequency
entered.
i
The station list is only available for the FM
waveband. It contains all the stations that can be
currently received and is sorted by station fre-
quencies.
i
This function is not available for Weather
Band.
i
This function is not available for Weather
Band.
i
You can only select currently permitted
numbers.