Filter
Top Products
145
Control systems
COMAND telephone*
̈ Deleting message: Press n.
Functions during a single-call
connection
Illustration: telephone mode during a call
1 Symbol for active telephone con-
nection (also visible in other operating
modes)
2 Signal strength display
3 To switch hands-free microphone on or
off
4 Length of call display
5 To send character strings
6 To end a call
7 Person you are calling
Switching the hands-free microphone
on or off
̈ Switching screen to telephone
mode: Call up main telephone menu
(
୴ page 139).
̈ Switching off microphone:
Select “Mic OFF” and press n.
or
̈ Press F shortcut button.
If the microphone is switched off,
the > symbol appears in the main ar-
ea.
̈ Switching on microphone:
Select “Mic ON”.
or
̈ Press F shortcut button.
The > symbol disappears.
Sending a character string via DTMF
Answering machines or other devices can
be controlled by character strings (e.g. for
remote query functions).
Sending character strings via the DTMF
menu
̈ During a call, select “DTMF”.
The DTMF dialing display appears.
i
The name of the person you are speaking
with can only be seen in display 7 if his or her
telephone number and name have been saved in
the COMAND address book or phone book on
the mobile phone. The telephone number must
also be saved in the same way in which the per-
son you are talking to transmits it.
i
This function is not possible with every mo-
bile phone. If the mobile phone supports the
function, you can use it during the call connec-
tion and also during a call.
୴୴