Filter
Top Products
Magellan NAV 6500/NAV 651012
Map Screen
From the SAT STATUS screen, press Nxt Scrn to access the
Map Screen.
When the Map Screen is viewed for the first time after the
unit is turned on, the map always shows the cursor location
before the unit was turned off.
If the receiver is not yet initialized, the cursor
position defaults to 00°00.00 N and 00°00.00 E,
off the African coast in the Gulf of Guinea. See
Initializing.
On the left side of the screen, an information window dis-
plays the name of the destination waypoint of the active route
(if any), the distance and bearing from the present position to
the destination waypoint, the cartographic scale, and GPS
status, as well as COG, SOG, XTE and steering data if you
are moving.
Ten seconds after accessing the Map screen, the help bar dis-
appears and the date and time are shown.
Press the Hide softkey to temporarily remove the informa-
tion window, extending the map to the full screen width. Press
the Show softkey to redisplay the information window.
Aux Waypts Routes NxtScrn
03:07:21 PM
To Cursor
BRG 035` M
DTG 6.7
n
m
COG 359` M
SOG 7.0
XTE --.-
TRN ---`
34`06'34"N
119`26'01"W
GPS Fix
Scale: 954
k
t
n
m
Los Angel
Hide
n
m