LXI LX7007 GPS Receiver User Manual


 
LX 7007 pro IGC V1.0 Apr.2005
Page 4
1 General
The instrument consists of two units, the LX 7007 DU main unit, and the LX 7007 AU LCD Vario indicator unit. The
80mm diameter (3") main unit LX 7007 DU is fitted with an integral 12 channel GPS receiver and a high resolution
display with 160x240 pixels. The 57 mm diameter (2 1/4") LX 7007 AU is a new design with its own integral micro
processor and communicates with the LX 7007 DU via the RS 485 system bus. Optionally, additional LX digital Vario
indicators can be daisy chained using the RS 485 bus.
Vario functions include:
Vario, Netto, Relative (Super Netto) and Averager (new algorithms for vario signal acquisition added)
Speed command
Final glide calculator
TE compensation is selectable for either pneumatic TE tube, or electronic TE
Navigation functions include:
Airport and airspace database for Europe or USA (up to 5000 airports)
600 turn points
100 tasks
Statistics
Display of nearest airports
Support of AAT (assigned area task)
What does LX 7007 PRO IGC mean?
The LX 7007 PRO IGC has an integral IGC approved flight recorder utilizing a dedicated pressure sensor for pressure
altitude recording based on 1013.2 hpA (29.92"). An integral engine noise capability is fitted for self sustaining and self
launching sailplanes. The firmware ensures data integrity and meets all IGC requirements regarding security of the
flight record data.
1.1 Technical data
Power 8-16 V DC
Consumption 400mA @ 12V (without audio)
80mm (3") standard Aircraft cut-out for LX 7007 DU
57mm (2 1/4") standard Aircraft cut-out for LX 7007 AU
Length 120 mm (incl. connector)
There physically separated com. Ports:
-PDA port with 5V power supply, delivers NMEA or allows data exchange LX 7007-PDA
- PC port
- IGC com port with IGC standard connector, suitable to connect Colibri or LX 20
-User com. port for some future applications
Drives SeeYou mobile, Navigator, Winpilot….
PDA communication with Connect LX
12 Channel GPS receiver
memory space to store the whole European airspace
External speaker
Built in fuse to prevent damages in stead of a short on 485 bus
Data compatible with LX 20 and Colibri
IGC approved flight recorder
Wiring
Additional LCD Vario, rear seat unit, remote control and compass options can be connected via the RS 485 bus
Weight: 800g