Filter
Top Products
LX 7007 pro IGC V1.0 Apr.2005
Page 29
Upper numerical line:
• Integrator, time, flight time, leg time
Lower numerical line:
• ALT (NN altitude), distance, GL DIF. (final glide altitude difference), SPEED (TAS), LEG S. (speed on leg).
2.1.2.17 COMPASS
This unit is an optional extra. The compass module is connected by the 485 bus to the LX 7007 PRO IGC. If the
compass is connected, this setting enables the compass to be calibrated and is described in Chapter 7. If a compass
module is not connected, the COMPASS setting is not active.
2.1.2.18 ENL (Engine Noise Level)
This page shows the current ENL reading to confirm that it is operating correctly. No adjustment is possible.
2.1.2.19 PAGE 1 (Main Navigation Page)
There is a choice of three variants of the layout of this page. The three pages are shown below; the third variant being
the default:
Variant 3 will bring useable information in SC, actual glide ratio and the minimum glide ratio to reach the point.
Actual and min glide ratio
to reach finish, TP or APT
Vario SC
Wind Component
Final glide command
Wind
Final glide
Vector Wind
Wind