Filter
Top Products
LX 7007 pro IGC V1.0 Apr.2005
Page 33
Further rotation of the UP/DOWN selector will call up the fourth, or arrival page.
ETA (estimated time of arrival) and ETE (estimated time enroute) define the arrival time and the time needed to reach
the destination. Both depend on the settings in the INIT menu. If the glider is not tracking in the direction of the
selected point (track and bearing differ more than 90
0
), both times will be replaced with stars. The age of the last wind
update in min is displayed after the wind vector.
Continued rotation of the UP/DOWN selector will show the last page, where details of the selected airport will be
displayed.
The data is self explanatory except for the traffic circuit, TC details. The pattern height together with its orientation (N
or S) is displayed. The letter I means that the pattern details are not defined.
2.2.3.2 Airport Selection, Team and Wind Calculation
After placing the cursor on the function required and pressing ENTER, a menu appears which offers airport selection,
the team function, or selection of the method of wind calculation.
2.2.3.2.1 SELECT - Airport Selection
There are two ways to select an airport. If the ICAO locator is known, it can be directly entered when the name of the
airport will be displayed.
VOR similar indicator
Off course deviation
Desired track input (OBS similar)
Using ZOOM
Time
ETA
ETE
Wind, direction and speed,
minutes since the last update
OAT and battery voltage