Filter
Top Products
B KLN 94
Rev. 4, Jan/2003 10599I04.CDL Page A-2
1.0 GENERAL RS-232 IN
The RS-232 interface will have the following characteristics:
The receiving order of data bits within each data byte shall be:
BYTE FORMAT
Electrical per EIA RS 232C
9600 baud, 8 bits, 1 stop bit, no parity
MARK is a logical 1 (one) and SPACE is a logical 0 (zero)
START bit begins as MARK, goes to SPACE
START bit
Data bit 0 (LSB)
Data bit 1
Data bit 2
Data bit 3
Data bit 4
Data bit 5
Data bit 6
Data bit 7 (MSB)
STOP bit