Filter
Top Products
B KLN 94
Rev. 4, Jan/2003 10599I04.CDL Page 2-25
NOTES
1. For best performance, electrical bond between aircraft and antenna should be less than 10
milliohms measured from TNC connector to aircraft skin.
2. Antenna to be mounted with four 8-32 x 3/4 inch long Pan Head phillips stainless steel
screws (Honeywell P/N 089-05909-0012).
3. Serial tags to be vendor supplied in accordance with Honeywell P/N 057-05753-0000 and
Comant P/N B40585-1.
4. Airspeed Rating: 600 knots TAS maximum.
5. Antenna to be installed with installation kit Honeywell part number 050-03318-0000.
6. Antennas to be bulk packaged as per good commercial practice.
7. Finished antenna assembly to be tested utilizing Honeywell Test Chamber 190-2361-XX or
equivalent, and CHU Associates source antenna model CA3224, or Tecom Model
401163-2.
FIGURE 2-9 KA 92 OUTLINE
Dwg. No. 071-01553-0200 Rev. AB
Sheet 3 of 3