Honeywell KLN 94 GPS Receiver User Manual


 
B KLN 94
Rev. 4, Jan/2003 10599I04.CDL Page A-15
q
(cont)
ttfffff 7 Byte 1--System Type:
ASCII 0 is undefined
ASCII 1 = COM
ASCII 2 = NAV
ASCII 3 and above are currently undefined
Byte 2--System Number:
ASCII 0 is undefined
ASCII 1 = System 1
ASCII 2 = System 2
ASCII 3 = System 3
ASCII 4 = System 4
ASCII 5 and above are currently undefined
Bytes 3-7—Frequency:
This data is equal to (Frequency – 100) * 1000
It is assumed that all frequencies are in the
100-199 MHz range, so hundreds of megahertz
are omitted.
t abcdefghij 10 GPS discretes
a=W for waypoint alert; T for turn; else dashed
b=N for new message; P for persistent
message; else dashed
c=E for en route; T for terminal; R for
approach arm; or A for approach active
d=L for LEG; D for direct-to; O for OBS; T for
OBS->LEG transition, V for VTF.
e=T for TO; F for FROM; else dashed
fghij=reserved for future use; currently dashed
u free format for development testing only
w ddsiiiiilllLLLLmm 17
flight plan waypoint data
1,2,3
; this item is sent for
each waypoint in the active flight plan
dd=waypoint number (01 ~ 25)
s=discretes
bits: 76543210
xladsgit
t=0 leg follows; t=1 arc follows
i=1 no-point-symbol in map (for invisible wpt )
g=1 gap follows (for visible non-connected wpt )
ENHANCED RS232
Item
Designator
Data
Format
Data Field
Width
Description