Filter
Top Products
B KLN 94
Rev. 4, Jan/2003 10599I04.CDL Page 1-9
1.5.2 Indicators and HSIs
NOTE
The KPI 553A/553B DME distance display is not compatible with
the KLN 94.
The KPI 553A models that do not have an OBS knob on the
indicator were special for the KNR 665 system and are not
compatible with the GPSs.
1.5.3 CDI Indicator with "MSG" and "WPT" Annunciators
Some stand alone CDI indicators are available with WPT/MSG annunciators built in. One
commonly used is the Model MD40-39, manufactured by Midcontinent Instrument, telephone
(316) 683-5619. These devices have no resolver interface. The use of an OBS resolver will
reduce pilot workload.
1.6 OPTIONAL ACCESSORIES
1.6.1 PC Interface Kit
The navigation database may be loaded directly from the PC to the KLN 94 installed in an aircraft
by means of the bezel jack (refer to Section 2.4.4.8 for details). To utilize the bezel jack for loading
of the database, order kit part number 050-03612-0000.
If the installation was previously a KLN 89B installation and utilized an external jack, order
interface kit P/N 050-03213-0000 in order to load the navigation database from a personal
computer. The kit contains a ready to use cable which connects between the aircraft connector
and the computer’s 9 pin or 25 pin serial connector. The kit is necessary whether the user is
loading from a Honeywell diskette or a database obtained via the Internet.
The cartography database is contained in the Sandisk cartridge. The cartography data is not
updated as frequently as the navigation data.
DESCRIPTION
KI 202 or KI 206 (P/N 066-3034-XX)
Navigation Indicator and Installation Kit (050-01524-0000)
KI 208A or KI 209A (P/N 066-3056-XX)
Navigation Indicator and Installation Kit (050-01524-0000)
KPI 553A (P/N 066-3045-XX)
Horizontal Situation Indicator and Installation Kit (050-01791-XXXX)
KPI 553B (P/N 066-3069-XX)
Horizontal Situation Indicator and Installation Kit (050-02167-XXXX)
KI 525A (P/N 066-3046-XX)
Horizontal Situation Indicator and Installation Kit (050-01334-XXXX)