Honeywell KLN 94 GPS Receiver User Manual


 
B KLN 94
Rev. 4, Jan/2003 10599I04.CDL Page 2-68
2.4.1.1 Maintenance 1 (MNT 1) Pages
The MNT+1 page is now displayed. There are three MNT+1 pages. The + sign indicates that
there is more than one MNT 1 page. The first MNT 1 page has the following selection choices
and format:
1.Whether the unit is certified as IFR or VFR.
2.Whether the unit is certified for IFR enroute/terminal use only or for both enroute/terminal and
non-precision approach.
3.Whether the altitude alerting feature is enabled or disabled. If the aircraft has another source of
altitude alerting such as that associated with a flight control preselector, this feature should be
disabled.
To change a selection:
Press the CRSR button to bring the flashing cursor on the screen. Turn the larger outer knob to
position the cursor over the desired selection. Turn the small inner knob to change the selection.
Make any additional changes on this page at this time. When finished, press the CRSR button to
turn off the cursor.
To select different MNT pages:
Turn the small inner knob (the flashing cursor must be off the page. If it is on, press the CRSR
button to turn it off). Select the second MNT+1 page.
The second MNT+1 page has the following selection choices and format. Changes are made
using the CRSR button and concentric knob as described above.
1.Whether the KLN 94 is interfaced with a fuel management system.
2.Whether the fuel management system includes it own control/indicator used to enter fuel
quantity. (Not a choice if there is no fuel management system).
3.What is the full fuel quantity of the aircraft. (Not a choice if there is no fuel management system
or if the fuel management system has its own control/indicator used to enter fuel quantity).
First MNT +1 Page Format Selection Choices Default
IFR/VFR: IFR IFR or VFR VFR
IFR Apr/Enr: Apr Apr or Enr (blank if line one above is VFR) Enr
ALT alt: Enabled Enabled or Disabled Disabled