Filter
Top Products
Reference
55
Creating a Route
5. To have intermediate points on the route, use this same procedure to select the first turn on the
route and press the ENTER key. If there is a single road that connects the new point and the
previous point, the route will follow that road. Otherwise, your route will follow a straight line
between the two points.
6. If you desire to have more intermediate turns (points) on the route, repeat step 5 as necessary.
(Continued on page 56)
Zoom out if necessary
Note How Route Line follows HWY 70
Zoom Back In to Show Nearby Cities
Point to road intersections
Finding the Destination
Route Distance Displayed (Point to Point)
Entering last turn
In order for the route to follow roads, it is necessary to select all intermediate turns, including on
and off-ramps. The advantages of having the route follow the roads are that the distances and times are
more accurate, and the turn guidance is more specific, among others.