Filter
Top Products
32
Reference
System Setup
The System Setup Pages (top left picture) can be accessed in two ways. All option menus
include System Setup as a choice. In addition, at any time you may press the OPTION key twice to
display the System Setup. This is a group of pages used to perform various System Setup functions,
including configuring the display and backlighting, units of measure, and setting various alarms. Each
available page is denoted by a ‘file tab’ at the top that identifies the function of that page.
To select a System Setup option:
1. With the System Setup on the screen, highlight the file tab for the desired function. The
associated information and options are automatically displayed when the file tab is highlighted.
2. Once the desired file tab has been selected use the DOWN key to highlight the desired option
to view or modify.
3. Press the ENTER key to change to a different option. In most cases, a list of available options is
shown (bottom left picture).
4. Use the ROCKER keypad to select the desired choice, then press the ENTER key again to accept
the change.
5. Use the UP key to return to the file tab area and select another file tab, if desired.
At some time, you may desire to change part of the System Setup back to the way it was the
first time you used your StreetPilot. This can be done by selecting the option called Restore Factory
Settings.
“Pop Up” Options Windows
System Setup