Filter
Top Products
Reference
53
Navigating on a Direct Goto
Road Sign Page
Selecting “Show Time to Go”
The Road Sign Page on a Direct Goto
The other major difference when the StreetPilot is navigating on a Direct Goto is that a new page
called the Road Sign Page (top right picture) is displayed between the Map Page and the Dashboard Page.
! A pointer shows the direction from your current location to the destination, based on
your direction of travel.
! The compass direction to go (North, South, etc.), as well as the name of the destination,
and the address in some cases.
! The Distance to Go.
! The Arrival Time or Time to Go.
To change the time displayed on the Road Sign Page:
1. With the Road Sign Page displayed, press the OPTION key.
2. Use the ROCKER keypad to select Show Time to Go or Show Arrival Time (bottom right
picture) and press the ENTER key.
Once you reach your destination, or you do not require guidance to it anymore, it is often
desirable to stop navigation so the Map Page displays other information.
To stop navigation from the Road Sign Page:
1. With the Road Sign Page displayed, press the OPTION key.
2. Use the ROCKER keypad to select Stop Navigation and then press the ENTER key.