Filter
Top Products
34
Display Page
The Display Page allows you to set the display backlight timeout (on all the time, 15 or 30
seconds, and 1 or 2 minutes) and the display contrast.
To change the light timeout:
1. Press the PAGE button and switch to the MENU Page. Press the UP or DOWN button to
highlight ‘SETUP.’ Press
ENTER. The SETUP Page appears.
2. Press the
UP or DOWN button to highlight ‘DISPLAY,’ then press ENTER. Press ENTER on
the ‘LIGHT TIMEOUT’ field.
3. Press the
UP or DOWN button to highlight your selection, then press ENTER. Press PAGE
to get back to the ‘SETUP’ page.
To adjust the display contrast:
1. Press the PAGE button to switch to the ‘MENU’ Page. Press the UP or DOWN button to
highlight ‘SETUP,’ then press
ENTER. The ‘SETUP’ Page appears.
2. Press the
UP or DOWN button to highlight ‘DISPLAY,’ then press ENTER. Press the UP or
DOWN button to highlight the ‘CONTRAST’ icon, then press
ENTER.
3. Press the
UP or DOWN button to adjust the contrast, then press ENTER. Press PAGE to
get back to the ‘SETUP’ page.
Units Page
Using your eTrex with a paper map increases the navigation power of both. If you are
going to use a map in conjunction with the eTrex, you must select the position format (grid),
map datum, map units, and north reference to match the map’s units. This is the purpose
of the Units Page. Regarding position format, the eTrex allows you to choose from more
than eighteen different grids. The eTrex supports the UTM/UPS and latitude/longitude grids
because together they cover the world.
Setup Page
You can set the backlight to stay on all the
time, but watch your battery power!
The Units Page allows you match the units
of the eTrex to the units of a unique paper
map you may be using.
Display and Units Pages