Filter
Top Products
19
To change the elevation:
1. From the MARK WAYPOINT Page, press the UP or DOWN button to highlight the ‘ELEV’
field, then press
ENTER. The ENTER CORRECT ELEVATION Page appears.
2. Press the
UP or DOWN button to highlight the desired digit, then press ENTER. A selec-
tion window appears. Press the
UP or DOWN button to select a new number, then press
ENTER. Repeat until all numbers are changed.
3. Press the
UP or DOWN button to highlight the ‘OK’ field, then press ENTER. The MARK
WAYPOINT Page appears with the corrected elevation displayed.
To change the location (latitude/longitude):
1. From the MARK WAYPOINT page, press the UP or DOWN button to highlight the ‘LAT/
LON’ field, then press
ENTER. The EDIT LOCATION Page appears.
2. Press the
UP or DOWN button to highlight the desired letter or digit, then press ENTER.
A selection window appears. Press the
UP or DOWN button to select a new letter or
number, then press
ENTER. Repeat until location is changed.
3. Press the
UP or DOWN button to highlight the ‘OK’ field, then press ENTER. The MARK
WAYPOINT Page appears.
4. Press the
UP or DOWN button to highlight the ‘OK’ field, then press ENTER. Your loca-
tion with the new latitude/longitude is now stored in memory.
Mark Waypoint Page
The ‘EDIT LOCATION’ Page displays
on-screen instructions on how to edit the
waypoint location.
The ‘ENTER CORRECT ELEVATION’ Page allows
you to change the elevation for the waypoint.
Menu Page