Filter
Top Products
11
SkyView Page
Options
Reference
This section describes the features and use of the eTrex in more detail than the Getting
Started Section.
SkyView Page Options
In addition to the functions of the default SkyView Page as described on page 2, there is an
‘OPTIONS’ menu available. To activate the ‘OPTIONS’ menu, press ENTER with the SkyView
Page displayed. There are two options available:
• Setup Display: The Setup Display feature allows you to change the display contrast and set
the length of time that the backlight will stay on.
To change the contrast:
1. Place the highlight over the Contrast Slider, then press ENTER to activate the slider.
2. Press the UP button to darken the contrast or the DOWN button to lighten the contrast.
3. When finished press
ENTER to save the setting.
To set the (
Back
) Light Timeout:
1. Place the highlight over the ‘LIGHT TIMEOUT’ field and press ENTER.
2. Press the UP or DOWN button to choose the setting that you desire.
3. Press
ENTER to save the setting.
• Advanced SkyView: When you select the Advanced SkyView feature the eTrex displays a
different SkyView Page containing more detailed information on the satellites, including their
signal strength and their position in relation to you.
To select the Advanced SkyView Page:
Place the highlight over the ‘ADVANCED SKYVIEW’ field and press ENTER.
Normal SkyView Page
Options
The SkyView Page