Furuno RP180 GPS Receiver User Manual


 
11. MAINTENANCE, TROUBLESHOOTING
11-2
11.2 Diagnostic Test
1. Press the [MENU] key.
2. Press the [1] key twice to show the Video Plot/AIS menu.
3. Press the [0] key twice to choose AIS/Miscellaneous1.
4. Press the [6] key twice to choose Test.
The diagnostic test displays program version no., checks the ROM, RAM, DPRAM,
SRAM, internal battery, memory card battery and serial input(*2) for proper operation,
displaying OK or NG (No Good) as the check result. For NG at ROM, RAM, DPRAM or
SRAM contact your agent or dealer for advice. DIP switch setting is also shown.
TEST [RP-1] [RP-2]
Program No. 0359219-xx* 0359220-xx*
ROM OK OK
RAM OK OK
DPRAM OK OK
SRAM OK
DIP SW (1234) 00 00
Main Board Batt. OK
Card Batt. (Right) *1 OK
Card Batt. (Left) *1 OK
Card (Right) *1 OK
Card (Left) *1 OK
SIO *2 - -
*: xx = Program Version No.
Diagnostic test results
*1: When memory card is not inserted, nothing appears for results of Card and Card.
Batt. If a write-protected memory card is inserted, NG appears as results for Card.
*2: For factory use.
5. Press the [MENU] key to finish.