Filter
Top Products
5. WAYPOINTS, ROUTES
5-2
5. Press the [3] key (OS Pos) twice, and a waypoint mark with waypoint number inside is
inscribed at own ship’s position.
6. Press the [MENU] key to finish.
If there is no empty waypoint, a beep sounds and no waypoint can be entered. In this case
erase unnecessary waypoints.
5.2.2 Entering waypoints at cursor position
1. Press [MENU], [1], [1], [4], [4].
2. If you want to register the waypoint under a number different from what is shown below
“WPT No.,” press the [5] key, key in desired waypoint number in two digits and then
press the [ENTER/SELECT] key. If you do not care to change the waypoint number, go
to step 3; the waypoint will be registered under the number shown below WPT No.
3. Place the cursor on the location desired for a waypoint.
4. Press the [2] key (Cursor) twice, and a waypoint mark with waypoint number inside is
inscribed at the cursor location.
5. Press the [MENU] key to finish.
5.2.3 Entering waypoints by manual entry of latitude and longitude
1. Press [MENU], [1], [1], [4], [4].
2. Press the [4] key twice to choose List.
(Waypoint List)
No. Comment
100°00.000'N 000°00.000'E ABCDEFGHJK
200°00.000'N 000°00.000'E 9876543210
3 ° . 'N ° . 'E
4 ° . 'N ° . 'E
5 ° . 'N ° . 'E
6 ° . 'N ° . 'E
7 ° . 'N ° . 'E
8 ° . 'N ° . 'E
9 ° . 'N ° . 'E
10 ° . 'N ° . 'E
20 ° . 'N ° . 'E
99 ° . 'N ° . 'E
Enter Lat/Long.
N, E: + S,W: - Delete: CLR Enter: ENT
Escape: MENU
Data input cursor
Character selection cursor
Available characters
Move cursor by using trackball and press ENT.
Z , - ! ? / & = # _ 1 2 3 4 5 6 7 8 9 0
a b c d e f g h i j k l m n o p q r s t u v w x y
z
↑
(Japanese characters appear here.)
A B C D E F G H I J K L M N O P Q R S T U V W X Y
OK
Waypoint list