Filter
Top Products
3. TRACK
3-6
3.5.2 Erasing track by color
Own ship’s track and target tracks may be erased by color as follows:
1. Press [MENU], [1], [1], [0], [0], [3], [3] to show the Delete Memory menu.
2. Press the [5] key (Own Track Color All) or [6] (Target Track Color All) depending on your
objective.
3. Press the [ENTER/SELECT] key.
4. Press the [ENTER/SELECT] key again followed by the [MENU] key.
3.6 Own Ship, Target Track Color
You may display own ship’s track and target tracks in red, yellow*, green*, cyan, magenta,
blue or white*. as below. (* = Not available on IMO-type radar.) The color currently chosen
for each target is shown on the Plot Color menu.
1. Press the [MENU] key [1], [1], [7], [7] to open the Plot Interval menu.
2. Press the [0] key twice to choose Plot Color.
Plot Color
1.
2. Own Ship Color
R Y* G* C
M B W*
3. Target No. 01
4. Target Plot Color
R Y* G* C
M B W*
[Target Plot Color List]
Target No. Color
01 M
02 M
03 M
.
.
.
20 M
*: Not available on IMO-type radar.
Plot color menu
3. Do one of the following depending on your objective:
Own Ship Track Color
a) Press the [2] key to choose Own Ship Color
b) Press the [2] key again to choose color desired.
Target Track Color
a) Press the [3] key to choose Target No.
b) Key in target no. with the numeric keys and then press the [ENTER/SELECT] key.
c) Press the [4] key to choose Target Plot Color.
d) Press the [4] key again to choose color desired.
4. Press the [ENTER/SELECT] key.
5. Press the [MENU] key to close the menu.