Filter
Top Products
1. OPERATIONAL OVERVIEW
1-3
1.3 Choosing Displays
The RP-180 has three displays: Radar, Video Plotter, and Combination (radar + video
plotter). Displays may be selected on the Video Plot/AIS menu as follows:
1. Press the [MENU] key.
2. Press the [1] key twice to show the VIDEO PLOT/AIS menu.
VIDEO PLOT/AIS MENU
1. Radar Disp
2. Combination Disp
3. Video Plot Disp
4. Waypoint
5. Route
6. Destination Set
7. Plot Interval
8. Memory Card
9.
Coastline/Mark Disp
0.
AIS/Miscellaneous1
VIDEO PLOT/AIS menu
3. Press the [1], [2] or [3] key to choose the mode desired.
4. Press the [MENU] key to close the menu.
Video Plotter DisplayCombnation DisplayRadar Display
Displays
Note 1: The combination display requires heading signal. When the heading signal fails,
the radar display is automatically selected.
Note 2: The RP-180 may be used with the IMO-specification radar, however the video
plotter display is not available.