Filter
Top Products
3. TRACK
3-2
3.2 Stopping Plotting of Own Ship’s Track
When your ship is at anchor or returning to port you probably will not need to plot (record)
the track. You can stop plotting the track, to conserve the track memory, by actuating the
“HOLD” function. The track is neither plotted nor saved, thereby conserving the track
memory.
3.2.1 Stopping track plotting
1. Press [MENU], [1], [1], [7], [7] to display the Plot Interval menu.
2. Press the [6] key to choose No from the Save Own Track field.
3. Press the [ENTER/SELECT] key. The HOLD icon (
) appears at the bottom of the
screen. (Video Plotter display only.)
4. Press the [MENU] key to finish.
(a) Plotting stopped; track is not plotted
(b) Track is again plotted when plotting
is resumed.
Plotting
stopped
Plotting
resumed
Track plotting stopped, track plotting resumed
To resume plotting, choose Yes at step 2 in the above procedure.