Filter
Top Products
4–6
34° 12.345' N 130° 23.456' E
MARINE POINT
001
ROUTE : 01 (In Use , REVERSE)
ENT: Enter
MENU: Escape
: RTE WPT
36° 12.345' N 135° 23.456' E
A POINT
002
AUG 12' 95 12 : 35U
AUG 13' 95 13 : 45U
skip Distance TTG
Trial Speed : Auto Man (012.0kt)
01
EN
02
EN
CLEAR: Delete
Use: In use
Fwd: Traverse waypoints in forward order
Rvs: Traverse waypoints in reverse order
Waypoint
list
Route
editing
screen
nm
.
D M H
nm
.
D M H
Figure 4-15 Route editing screen
5) If required, press ▲ to enter the speed by
which to calculate time-to-go.
6) Press t or s to select Auto or Man.
Auto: Current average speed is used to
calculate the time-to-go. Manual: Entered
speed is used to calculate the time-to-go.
Enter speed and press ▼.
Route waypoints may be registered two ways:
entering waypoint number directly or through
the route editing screen. Follow 1 or 2 be-
low.
11
11
1
Entering waypoint number directly
7) Enter waypoint number, in three digits.
The cursor shifts to the "Skip" window.
The procedure for skipping a waypoint is
shown on page 5-4. For now, go to the
next step.
8) Press ▼ to continue. If the waypoint en-
tered in step 7 does not exist, you are in-
formed that the waypoint does not exist
and entry is cancelled.
9) Enter other route waypoints by repeating
steps 7 and 8.
10)Press [MENU ESC] to finish.
22
22
2
Using previously registered waypoints
Enter waypoints in the order they will be tra-
versed; not by waypoint number order.
7) Press [
]. The reverse video on the
waypoint on route planing screen disap-
pears.
8) Press ▲ or ▼ to select waypoint number.
9) Press the [NU/CU ENT] key. Selected
waypoint number appears on the route
editing screen. The distance and time-to-
go indications to the first waypoint entered
are blank.
10)To enter other route waypoints, repeat
steps 8 and 9.
11)Press the [MENU ESC] key to finish.
Note: To return to the route editing screen,
press [
].
4.5 Erasing Route Waypoints
Route waypoints are mutually erased when
the navigators are sharing data.
1) Press [WPT RTE] and [5] to display the
route list.
2) Press ▲ or ▼ to select route.
3) Press s to display route editing screen.
4) Select the waypoint to erase.
5) Press the [CLEAR] key.
6) Press the [NU/CU ENT] key.
7) Repeat steps 2 through 4 to continue eras-
ing waypoints.
8) Press the [MENU ESC] key. The route is
rearranged to reflect the change.