Filter
Top Products
2–2
Cursor turned off
Ship's position (in latitude and longitude or
LOPs), speed and course appear on the dis-
play.
234°
DGPS 3D
34° 23.456´ N 135° 45.678´ E
BRG
345°
RNG
123
12.3
SPD
nm
kt
CSE
Own ship
mark
Own ship position
in latitude and longitude
Course
Speed
Figure 2-2 Data displayed
when the cursor is turned off
Shifting the cursor
1) Press the [CURSOR ON/OFF] key to turn
on the cursor.
2) Press the cursor keys to shift the cursor.
The cursor moves in the direction of the
cursor key arrow pressed. When the cur-
sor reaches the edge of the display, the
display shifts in the direction opposite of
the cursor key pressed.
Centering the cursor
Press the [CENTER] key.
2.4 Shifting the Display
The display can be shifted on the Plotter 1
and Plotter 2 displays, with the [CURSOR
ON/OFF] key. When own ship tracks off the
display it is automatically returned to the
screen center.
1) Press the [CURSOR ON/OFF] key to turn
off the cursor.
2) Press the cursor keys. The display shifts
in the direction of the cursor key pressed.
2.5 Centering Own Ship's
Position
1) Press the [CURSOR ON/OFF] key to turn
off the cursor.
2) Press the [CENTER] key.
2.6 Stopping/Starting Plotting
and Recording of Track
The DD-80 stores 2,000 points of track and
marks. When the memory becomes full the
oldest track is erased to make room for the
latest. Thus you may want to conserve the
memory when, for example, you are return-
ing to port or are anchored, by stopping plot-
ting and recording of the track.
Procedure
Press the [PLOT ON/OFF] key to start/stop
recording and plotting of track.
When plotting is resumed
"Resuming track plot" appears at the center
of the display for about three seconds.
When plotting is stopped
"Stopping track plot" appears at the center of
the display for about three seconds and "
H
"
appears at the left side of the display. ("
H
"
does not appear on the Navigation and Data
displays.)