Barnett Engineering CV2 Automobile Alarm User Manual


 
Cellphone Status Codes 9-3
B1272M001 BARNETT ENGINEERING LTD. ProTalk Cv2
9.8 Extended State/ Drop Reason/ Online Mode (code 8)
Speaks “Code Eight is A point BC point D”, where:
A = Power Available
0: No Power to Transceiver
1: Module Power is On
BC = Call Dropped Reason
00: Phone is Offline
01: Phone is CDMA locked until Power Cycle
02: Phone has No Service
03: Call has Ended Abnormally
04: Received Intercept from Base Station - Origination only
05: Received Reorder from Base Station - Origination only
06: Received Release from Base Station - No Reason Given/Normal
07: Received Release from Base Station – Service Option Reject
08: Received Incoming Call from Base Station
09: Received Alert Stop from Base Station - Incoming only
10: Client Ended the Call
11: Received End Activation - Over-the-Air Service Provisioning Call only
12: Mobile Call Aborts the Origination/Conversation
13: Call Origination or Call Failed due to NDSS Failure
14: Call End due to Maximum Access Probe
D = Online Mode
0: Mode Information Not Initialized
1: Phone Is in ONLINE Mode
2: Phone Is in OFFLINE Mode
4: Phone Is Powering Off
5: Phone Is Resetting/Power Cycling