Filter
Top Products
Voice Storage and Configuration with the Telset 6-4
B1272M001
BARNETT ENGINEERING LTD. ProTalk Cv2
6.5 Programming Flowchart
Voice Menu (Basic and Advanced mode)
Cv2: “Enter Voice Code”
You:
Playback or record voices for Site ID and Groups 1 to 6
Playback or record voices for Alarm Inputs 1 to 8 (Basic mode only)
Playback or record voices for Control Outputs 1 to 3 (Basic mode only)
Playback or record voices for enabled Points 1 to 30
Erase All Voices
Exit to Main Menu
Exit to Main Menu
Playback or Record Voices
Cv2: “Site is” “Ajax Compressor Station”
or “Group 1 is” “Electrical” (Advanced mode only)
or “Alarm 1 is” “Power Failure” (Basic mode only)
or “Control 1 is” “Remote Shutdown” (Basic mode only)
or “Point 1 is” “Power Failure”
You:
Record new voice
Exit to Voice Menu
Accept current recording and advance to next voice
Recording:
Cv2: “beep”
You: “Acme Compressor Station”. Recording stops when you stop speaking.
Erase All Voices
Cv2: “Enter Voice Empty Code”
You:
Confirm erase command
Exit to Voice Menu
Exit to Voice Menu
Directory Menu (Basic and Advanced mode)
Cv2: “Enter Directory:
You:
Speak the list of Directory Codes
Select Directory A
Select Directory B
Select Directory C
Select Directory D
Select Directory E
Select Directory F
Exit to Main Menu
Exit to Main Menu